Bestcool 208

is a synthetic, heavy duty, water soluble, metal working fluid designed for a large cross section of metal working operations. This is not merely a coolant, a lubricant, or a rust inhibitor, but a unique combination of all these functions plus many added features. It contains a high level of additives, which improve lubricity and give it extreme pressure properties not found in most synthetic coolants. Also included are several additives designed to give it a long, trouble free life and prevent spoilage, bacterial growth, and residue build up. Unlike most metal working fluids, it is not affected by hard water, and functions to reduce the misting of water-based fluid. This metal working fluid itself acts as a light duty cleaner for parts and equipment, and deposits a short-term rust protective film.

Bestcool 310

a premium semi-synthetic, multi-purpose, water-soluble fluid designed for a wide range of machining operations.

Bestcool 310 EP

a premium semi-synthetic, multi-purpose, water-soluble fluid designed for a wide range of machining operations.

Bestcool Four Star

a multi-purpose, water soluble fluid for a wide range of manufacturing and machining operations.  Its high lubricity, excellent heat transfer properties, and non-reactive nature, make it a superior product, suited for use on ferrous and nonferrous metals such as copper and aluminum.

Bestcut 105

is a multi purpose water-soluble fluid for a wide range of manufacturing and machining operations. Its high lubricity, excellent heat transfer properties, and non-reactive nature, make it a superior product, especially suited for use on nonferrous metals such as copper and aluminum. Its outstanding rust protective properties and oil base formulation give it desirable qualities for the protection and lubrication of equipment. It is designed to handle nearly all fabricating and machining operations on copper and aluminum, as well as cutting, drilling, milling, grinding, and turning operations.

Bestcut (100,150, 300, 590) LSC

products are heavy duty, multi-purpose cutting oils for use in a wide variety of machining operations that require straight oil. They are formulated with special boundary lubricant additives and high levels of extreme pressure additives. With the different viscosities available, almost all machining operations can be handled very efficiently with one of the Bestcut LSC products.

Bestcut 193 EP-C & CF

multi-purpose, water soluble, extreme pressure fluids for a wide range of manufacturing and machining operations.  Their high lubricity, excellent heat transfer properties, and non-reactive nature, make them superior products, suited for use on ferrous and nonferrous metals, such as copper and aluminum.

Bestcut 762

is a very heavy-duty type, multi-purpose cutting oil, specally suited for high speed, high production gun drilling and trepanning applications. It utilizes some of the latest developments in surface chemistry to make a product that outperforms even the best conventional high EP and fatty type oils. It is a combination of a whole group of high performance chemical EP agents, rust and corrosion inhibitors, friction reducing agents and anti-wear materials. The fluid’s viscosity is balanced to reduce misting and supply a high rate of chip removal, along with a heat transfer rate that is well suited for the use of carbide tooling. Bestcut 762 is formulated to handle the toughest stainless steels, high nickel alloys and other alloys in gun drilling and trepanning operations. Because of its special properties, it is also well suited for many other tough cutting, turning, drilling and milling operations.

Best Tap 2400 EP

is an extreme pressure lubricant designed specifically for general purpose tapping operations. It contains high levels of extreme pressure additives as well as boundary lubricant additives and anti-corrosion ingredients. Its very high viscosity gives Best Tap 2400 EP adequate body for all tapping operations insuring adherence to the tap throughout the entire tapping operation. It is used as received and applied by hand.

Cinngrind 4

a special high performance, synthetic hydrocarbon based fluid designed for high speed grinding operations.  Its superior heat transfer performance results in cooler running and extending the life of the grinding fluid.

Drawing Compound 134B

is a very heavy duty, EP type, multi purpose, water-soluble drawing compound specially suited for high speed, high production runs. It utilizes the latest developments in surface chemistry to make a water-soluble product, which out performs even the best high EP and fatty type oil soluble compounds in high-speed operations. This product is not a simple emulsified chlorinated oil or an EP soluble oil with a different name. It was formulated from scratch with the best available drawing agents. It combines a whole group of high performance chemical, extreme pressure agents, rust and corrosion inhibitors, and friction reducing wetting agents. This unique combination results in a water reducible product with overall performance properties exceeding those of straight oil and fatty oil-based products. Drawing Compound 134B can be used on all metals. Use levels will vary with the severity of the drawing operation, the amount of heat produced in the draw, the rate of drawing speed, and die design. It is also available in a heavier viscosity grade: Drawing Compound 268B

Evaporative Stamping Lubricant 170

is designed for light to heavy duty forming operations and light to moderate duty drawing applications. It has unique properties as a forming and stamping lubricant due to its exceptional wetting and cleaning ability, as well as its lubricating capabilities. It finds use in a wide range of forming and stamping operations as well as some coining applications. Another major benefit of Evaporative Stamping Lubricant 170 is that it does not leave unwanted residues, which require extensive and expensive cleaning operations. You can use it to do the forming operation and proceed to subsequent operations or final use applications without a cleaning step. Evaporative Stamping Lubricant 170 is an exceptional multi-purpose product, which is safe on all metals and most plastics. It can be dipped, rolled, sprayed, brushed, wiped or otherwise transferred prior to the operation. Application just prior to the operation is recommended. It is used just as it comes out of the drum. It normally does not require use of other additives or diluents and should be used as is. Its high flash point makes it much safer to use than many competitive products and it does not cause staining or discoloration.

Formula 017

Interlube’s Formula 017 is designed for light to heavy duty forming operations and light to moderate duty drawing applications. It has unique properties as a forming and stamping lubricant due to its exceptional wetting and cleaning ability as well as its lubricating capabilities. It finds use in a wide range of forming and stamping operations as well as some coining applications.

Formula 41

is a high purity, general purpose solvent degreaser with relatively high flash point (>140°F), which allows it to be used more safely than other lower flash solvents. This high flash point also makes for easier disposal of the spent solvent. In many cases, a licensed used oil reclaimer can recycle it (check with your federal, state, and local authorities). It is an excellent parts washer and degreaser as well as a general-purpose solvent. It loosens grease, oil, dirt, grime and sludge allowing for easy removal and cleanup.

Formula 063

is a multi-purpose cleaner/degreaser that can be used in a wide variety of applications. It has excellent solvency and wetting properties that allow it to penetrate and displace the soil being removed. It quickly removes grease, dirt and grime. Formula 063 is an excellent ink solvent for removal of many types of inks and oil soluble dyes. It evaporates fairly rapidly for quick drying of the part being cleaned.

Formula 101X32D Pale Oil

The Interlube series of Pale Oils are formulated for a wide range of applications. These include insulating oils, metalworking fluids, anticorrosion fluids, rubber compounding, resin extenders, and plasticizers.

Formula 2028 Liquid Steam Cleaner

is a heavy duty, multi-purpose, liquid alkaline cleaner concentrate formulated for use in high pressure hot water or steam cleaning equipment to remove heavy deposits of dirt, grime, oil and grease. The convenient liquid form allows it to be proportioned directly from a drum using an eductorsystem, or it can be easily premixed in a tank.

Formula 6755-1 Water Displacing Rust Preventative

is a water displacing rust inhibitor especially suited for protecting parts and equipment during processing and/or storage. It has a unique penetrating – displacing action which results in the formation of an adherent – impenetrable rust preventative film. It contains solvent based materials which aid penetration and film formation and then evaporate, leaving a durable protective film which stands up to high humidity, weathering, and even water immersion or condensation run off. The protective film is slightly oily to the touch, transparent, and non conductive. Formula 6755-1 can be applied by brushing, dipping, slushing, or spraying. It forms a uniform film on dipping (~ 0.15 mil) and gives a high coverage rate.

Four Way Action II

An all purpose, non-flammable, non-conductive mechanic’s spray. Penetrates through rust and corrosion to loosen frozen nuts and bolts. Displaces moisture in wet electrical systems. Leaves treated surfaces protected with residual anti-corrosive film.

Interlube Quench Oil 100 A

a  general purpose, premium quality quenching fluid for carbon steel and heavier alloys which require fast/moderate quenching speed.  It exhibits excellent water separation and protects against rust and corrosion.

K-Draw 67 HF

is a food grade synthetic lubricant, designed for drawing, stamping, and forming operations. It is specially formulated for moderate to heavy-duty applications where very low residues are desired. It contains solvents, cleaners and solublizers to keep residues low and highly efficient boundary lubricants to prevent buildup of materials on the metals surfaces. K-Draw 67 HF is formulated with materials that meet US FDA requirements for incidental contact with food products and meets H-1 requirements. It is also designed for a wide range of application methods and can be applied by hand wiping, brushing, drip applicators, transfer pads, and various spraying methods.

K-Draw 165

is a H-1 food grade (NSF registered) evaporative stamping lubricant designed for light to heavy duty forming operations and light to moderate duty drawing applications. It has unique properties as a forming and stamping lubricant due to its exceptional wetting and cleaning ability as well as its lubricating capabilities. It finds use in a wide range of forming and stamping operations as well as some coining applications. Another major benefit of K-Draw 165 is that it does not leave unwanted residues, which require extensive and expensive cleaning operations. You can use it to do the forming operation and proceed to subsequent operations or final use applications without a cleaning step. K-Draw 165 is an exceptional multi-purpose product, which is safe on all metals and most plastics. It can be dipped, rolled, sprayed, brushed, wiped or otherwise transferred prior to the operation. Application just prior to the operation is recommended. Its high flash point makes it much safer to use than many competitive products and it does not cause staining or discoloration.

K-Draw 205

is a unique, food grade lubricant, designed for light to moderate duty forming, stamping, and drawing operations.   This product is a very low viscosity fluid which has exceptional wetting and cleaning ability, as well as lubricating properties.  It finds use in a wide range of forming and stamping operations as well as some coining operations.   A major benefit of K-Draw 205 is that it doesn’t leave unwanted residues which require extensive cleaning.   Use it to do the forming operation and you are finished with it and can proceed to subsequent operations without the need for an added cleaning step.

K-Draw 260

is food grade stamping lubricant designed for light to heavy duty forming operations and light to moderate drawing applications.  It has unique properties as a forming and stamping lubricant due to its exceptional wetting and cleaning ability as well as its lubricating capabilities.  It finds use in a wide range of forming and stamping operations, as well as some coining applications.  It leaves a very good, short term rust preventative film on the part after the metal forming operation. K-Draw 260 leaves a low viscosity film that needs only a light cleaning operation to remove.   In most cases, the residue is easily cleaned off with a light duty, water based cleaner or solvent degreaser.  Please contact your Interlube representative for our recommendations for your application.

K-Draw 9938A

K-Draw 9938A is a food grade stamping lubricant designed for light to heavy duty forming operations.

Protect-O-Cote

products are a series of versatile and effective rust preventatives for use under the most severe corrosion conditions. The Protect-O-Cote products have solvent carriers and, on evaporation of the solvent, they deposit an amber, translucent, “dry to the touch” film that gives long-term indoor and outdoor corrosion protection. The film protects metal surfaces against corrosion when exposed to extremes of high humidity, high and low temperatures, water mists, salt-water sprays, and environmental fumes. Protection supplied by the Protect-O-Cote products ranges from a long term indoor storage from Protect-O-Cote 1000 to long term outdoor storage from Protect-O-Cote OS. Protect-O-Cote products do not remove rust, but after thorough removal of loose scales, they can be applied to rusted surfaces to prevent further corrosion.

Quenching Oil 75 FQ

a general purpose, premium quality, quenching fluid for use in steels lean in alloy content and small grain size, which require fast to moderate quenching speed. It is ideal for parts with odd shapes or variable sections.

Rust Preventative 208

is a completely synthetic, heavy duty, water soluble, rust inhibitor designed to give excellent rust protection for short-term indoor storage. Its water-based formulation makes it easy to dilute with water. Dilution ratios vary upon the amount of film desired and storage duration requirements. In general, 20:1 dilution gives very good rust protection. Rust Preventative 208 is formulated with additives designed to prevent spoilage, bacterial growth, and residue build up – giving it a long, trouble free life.

SM Cutting Oil MV 281-E

specially designed for use in automatic screw machines requiring a combination cutting fluid and machine tool lubricant.  It has high lubricity, excellent boundary lubrication, and very effective anti wear capabilities to serve as the machine tool lubricant.

Thread Cutting Oil 300

is designed and manufactured to exacting specifications, which result in a product that is multi functional, exhibits excellent extreme pressure lubrication and better than average lubricity. In circumstances where only one product can be purchased Thread Cutting Oil 300 is an excellent choice. Thread cutting by hand or by automatic machines, along with tapping is also possible. The relatively high viscosity, 300 SUS at 100ºF, results in much slower runoff than products of lesser viscosity. This formulation is effective in reducing friction at the tool thread interface resulting in lower temperatures, faster, deeper and more uniform cuts. It can be use on all types of steel, including stainless steel. Because of the unique balance of ingredients, materials such as copper, nickel silver, phosphor bronze and other nonferrous metals can be cut with very minor discoloration. The high film strength that is built into Thread Cutting Oil 300 allows it to be used in applications where various grades of steels are machined. The use of a centrifuge will allow the separation of chips from the cutting oil and subsequent reuse of the product.

Waylube 160, 325, 500, & 1000

Specially compounded oils designed for lubrication of machine tool ways and other wetted parts. They are fortified with a unique combination of polymers, EP agents, and special boundary lubricants, which give them extremely low friction coefficient ratios (static/kinetic). This prevents machine tool carriage chatter, surface tolerance problems, and other variations that result from stick-slip operation. These products exceed major machine manufacturers’ requirements.

Special polymers are incorporated in these way lubricants to improve on the oil’s natural ability to adhere to the ways, gears, and other high load bearing surfaces, under even the most severe operating conditions. All of these factors yield reduced maintenance, decreased down time, and improved performance. These way lubricants are useful for a wide variety of other lubricating needs including enclosed gears, sliding surfaces, bearings, and chains where their high load carrying and adhesive properties are beneficial.