Packaging
Interlube Corporation has been supplying lubricants and cleaners to the packaging industry for many years. We understand the lubrication requirements of the machinery used in the bottling, canning, boxing, and other packaging industries. We have formulated many products specifically for these industries, including many that meet H-1, incidental food contact requirements.
Below is a list of a few of our products. We can custom design a product to fit your requirements. Please contact us for additional information or to place an order.
Products
Here is a list of our products. We can custom design a product to meet your requirements. Please contact us for additional information.
A 502 Grease
A502 Grease is a heavy-duty, multi-purpose grease, proven to be outstanding for chassis and bearing lubrication. It is fortified with extreme pressure agents to provide protection even when the best conventional lubricants fail quickly. The extreme pressure agents protect the bearing from scoring and destructive wear under the highest loading conditions. A502 Grease is a NLGI #2 grease. It is also available as a NLGI #1 (A501 Grease), a NLGI 0 (A500 Grease), a NLGI 00 (A5000 Grease) and a NLGI 000 (A50000 Grease).
Blue Tacky 803 Grease
is a premium, heavy duty, multi-purpose lithium complex grease specially designed for both low and high temperature performance. This high melting point grease is enhanced with special additives to give it very high film strength, anti-wear and EP performance. It incorporates premium quality, high flash point oils and combines them with special polymers to give it greater staying power than conventional greases. It has a blue colored smooth tacky appearance that readily identifies it from normal automotive grease products. This combination also makes it very resistant to water and gives it that special adherence to metallic surfaces.
Cinnfluid GB+1
products are multi-purpose, food grade lubricants, based on synthetic hydrocarbons, designed to give outstanding performance in heavy-duty industrial applications at very low and/or high temperatures. These products are especially designed for heavy-duty industrial applications involving high load conditions and extremely high operating temperatures. Their superior thermal and oxidation stabilities, coupled with outstanding anti-oxidants, far exceed the performance of conventional lubricants. Their naturally high viscosity indexes assure performance across a wide range of temperatures while their low inherent pour points assure performance at low temperatures unheard of with conventional petroleum lubricants. Cinnfluid GB +1 products maintain their performance benefits at conditions where most other products fail. They are available in many different viscosities grades to meet any need.
Cinnguard Greases
are special, PTFE containing, synthetic, food grade, non-melt grease formulations, which are odorless and nearly colorless. Their synthetic formulations give them truly outstanding performance at high and low temperatures and extremely long service life. They have excellent EP, anti-wear, anti-rust, anti-oxidation, and adhesive properties. The synthetic base fluids, used in their formulations, have a very high viscosity index making them excellent greases for use over wide temperature ranges. Cinnguard Greases are available in most NLGI grades and in a wide variety of oil viscosities.
Cinn-Lube FG MPA
is an aerosol product. Is a food grade multi-purpose synthetic lubricant, specially suited for lubrication of chains, slides and bearings which require a lubricant with superior protection from rust, corrosion, oxidation and wear from high loads or high temperature conditions. It is suitable for high temperature ovens.
Endura Gear Lubes Non Drip
are multi-viscosity polymer gear lubricants, designed to give total performance over wide temperature ranges for essentially all gear applications. They are formulated to give outstanding performance in the most severe industrial, automotive and heavy-duty trucking applications. The industrial applications cover all enclosed gearboxes including worm gears. The automotive and heavy-duty trucking applications include high performance hypoid gears and limited slip differentials. Incorporation of polymers gives them true multi-viscosity performance to cover for wide temperature fluctuations due to daily and seasonal changes. They also contain special polymers to improve on the oil’s natural ability to adhere to the gear and bearing surfaces under the most severe conditions and to reduce leakage. All of these factors add up to reduced maintenance, decreased downtime and improved performance. Endura Gear Lubes are available in all SAE gear lubricant grades.
Endura Moly Gear Lubes Non Drip
are multi viscosity – multi purpose polymer gear lubricants fortified with molybdenum disulfide (MoS2) and designed to give total performance over wide temperature ranges for essentially all gear applications. They are formulated to give outstanding performance in the most severe industrial, automotive and heavy-duty trucking applications. The industrial applications cover all enclosed gearbox applications including worm gears. Incorporation of polymers gives them true multi-viscosity performance to cover for wide temperature fluctuations due to daily and seasonal changes. The MoS2 is incorporated through a special process to produce an extremely stable suspension of the “moly” lubricating solids. The “moly” lubricating solids are of a sub-micron size that assures a stable suspension and eliminates concerns over removal by settling or filtration. They also contain special polymers to improve on the oils natural ability to adhere to the gear and bearing surfaces under the most severe conditions and to reduce leakage. All of these factors add up to reduced maintenance, decreased down time and outstanding performance. They are available in all SAE and AGMA gear lubricant grades.
Endura Polymer Grease 802
is a super heavy duty, extreme pressure, multi-purpose grease proven to excel in difficult industrial applications. It has superior high and low temperature properties, providing performance over a wide operating temperature range, plus high load carrying ability and excellent water resistance. The polymers increase the adhesiveness and shock load carrying ability of the grease, adding to the basic outstanding performance. The unique combination of polymers, high melting grease base, and extreme pressure and anti-wear additives make this grease a truly multi-purpose lubricant.
Endura Polymer Grease HD 252
is a premium, very heavy duty, EP containing, multi-purpose grease designed for industrial, off road, mining, construction, farm and transportation applications. It meets tough NLGI certification tests for multi-purpose greases and is extremely water resistant and adhesive. It is formulated with a premium performance package of high film strength agents, extreme pressure agents and anti-wear agents to give it superior load carrying and protective properties. The polymers incorporated in the formula increase the adhesiveness and shock load carrying abilities of the grease. Its own unique combination of additives and premium quality base stocks make it a truly heavy-duty multi-purpose lubricant. It is a NLGI #2 grease and is available also as a #1 (251) and 0 (250).
FG 1200 Synthetic Oven Chain & Bearing Lubricant
designed for use in high temperature ovens where a USDA H-1 lubricant is wanted or needed (acceptable for incidental food contact). It can be used in applications up to 240°C or 465°F. It offers excellent anti-wear performance and oxidation resistance.
Fire Resistant Hydraulic Fluid 59D
is a synthetic hydraulic fluid designed for applications that require a hydraulic fluid with greater fire resistance than that offered by conventional mineral oils. It has much higher flash and fire points than conventional mineral oils and some synthetic materials. This product is especially designed for heavy-duty industrial applications operating at high pressures and over wide temperature ranges. It has outstanding thermal properties as well as superior anti-wear and rust & oxidation resistance. Other advantages of its synthetic formulation are its naturally high viscosity index, low volatility, shear stability and biodegradability. It meets USDA H-1 requirements.
Heat Transfer Fluid 235
is a premium quality, synthetic, heat transfer fluid specially designed for sustained high temperature use in closed circulating systems equipped with expansion tanks. It offers exceptional resistance to oxidation at high temperatures, keeping sludging, varnishing, and carbon deposits to an absolute minimum. It has an operating temperature range well in excess of 600º F in closed systems and offers high thermal efficiency, extremely high flash and fire points, low viscosity for easy economical circulation, and extremely low volatility to reduce losses. Its unique synthetic hydrocarbon structure offers a high degree of resistance to breakdowns during high temperature service, which far exceeds that of both conventional heat transfer oils and other synthetic heat transfer fluids. Heat Transfer Fluid 235 not only offers exceptional heat transfer properties and long term anti-fouling and high temperature stability, but does so without the inherent environmental and human health exposure risks of many heat transfer fluids in the market. It is especially suited for high temperature heat transfer applications in systems for resins, plastics, asphalts, waxes, varnishes, and many other applications. It is USDA approved H1 and NSF Registered as HT1 meaning it is acceptable for incidental contact with food, food products or other food related material, such as packaging.
High Temperature Synthetic Lube 100
is formulated for uses where the lubricant is exposed to high temperatures for extended periods of time. It is especially suited for use as an oven chain and bearing lubricant. It is also used for many other high and low temperature applications requiring a fluid with properties extending beyond those available with conventional mineral oils. High Temperature Synthetic Lube 100 has excellent thermal stability and oxidation resistance. This product has excellent solvent properties resulting in its actually removing built up carbon and varnish deposits during its first few days of operation in a system that previously employed a conventional lubricant.
Hot Plate Lube PW
is a lubricant specifically designed for use on the hot plate of corrugated manufacturing machines. When applied the Hot Plate Lube PW will prevent the sticking of the corrugated material to the hot plate during the drying process. Hot Plate Lube PW is completely colorless to prevent the staining of the corrugated material. This is particularly important on light-colored or white corrugated. Hot Plate Lube PW is USDA approved H-1 for incidental contact with food, making it a perfect fit when dealing with a food packaging type of corrugated material. It can be applied by mop, swab, brush or squeegee.
K-Draw 67 HF
is a food grade synthetic lubricant, designed for drawing, stamping, and forming operations. It is specially formulated for moderate to heavy-duty applications where very low residues are desired. It contains solvents, cleaners and solublizers to keep residues low and highly efficient boundary lubricants to prevent buildup of materials on the metals surfaces. K-Draw 67 HF is formulated with materials that meet US FDA requirements for incidental contact with food products and meets H-1 requirements. It is also designed for a wide range of application methods and can be applied by hand wiping, brushing, drip applicators, transfer pads, and various spraying methods.
K-Draw 165
is a H-1 food grade (NSF registered) evaporative stamping lubricant designed for light to heavy duty forming operations and light to moderate duty drawing applications. It has unique properties as a forming and stamping lubricant due to its exceptional wetting and cleaning ability as well as its lubricating capabilities. It finds use in a wide range of forming and stamping operations as well as some coining applications. Another major benefit of K-Draw 165 is that it does not leave unwanted residues, which require extensive and expensive cleaning operations. You can use it to do the forming operation and proceed to subsequent operations or final use applications without a cleaning step. K-Draw 165 is an exceptional multi-purpose product, which is safe on all metals and most plastics. It can be dipped, rolled, sprayed, brushed, wiped or otherwise transferred prior to the operation. Application just prior to the operation is recommended. Its high flash point makes it much safer to use than many competitive products and it does not cause staining or discoloration.
K-Draw 205
is a unique, food grade lubricant, designed for light to moderate duty forming, stamping, and drawing operations. This product is a very low viscosity fluid which has exceptional wetting and cleaning ability, as well as lubricating properties. It finds use in a wide range of forming and stamping operations as well as some coining operations. A major benefit of K-Draw 205 is that it doesn’t leave unwanted residues which require extensive cleaning. Use it to do the forming operation and you are finished with it and can proceed to subsequent operations without the need for an added cleaning step.
K-Draw 260
is food grade stamping lubricant designed for light to heavy duty forming operations and light to moderate drawing applications. It has unique properties as a forming and stamping lubricant due to its exceptional wetting and cleaning ability as well as its lubricating capabilities. It finds use in a wide range of forming and stamping operations, as well as some coining applications. It leaves a very good, short term rust preventative film on the part after the metal forming operation. K-Draw 260 leaves a low viscosity film that needs only a light cleaning operation to remove. In most cases, the residue is easily cleaned off with a light duty, water based cleaner or solvent degreaser. Please contact your Interlube representative for our recommendations for your application.
K-Draw 9938A
K-Draw 9938A is a food grade stamping lubricant designed for light to heavy duty forming operations.
Nova Oils
Interlube’s Nova (ISO) A Oils are premium quality anti-wear, anti-foam, rust and oxidation inhibited hydraulic oils, which meet the requirements of all major hydraulic equipment manufacturers. They were developed for use in modern high pressure, high speed hydraulic systems to insure maximum pump wear protection, and to prolong the systems life.
Penetrating Oil
A forceful spray which provides rapid penetration through rust and corrosion to loosen frozen nuts, bolts and mechanical parts
Silicone Lubricant II
is used to lubricant passenger coach windows and seat mechanisms, door hinges, drawers, locks, etc. Meets USDA H-1 requirements.
Super White 1910 FG-2
is a synthetic, multi-purpose, food grade grease, specially formulated for moderate to high temperature applications where water or steam may be present. It has outstanding water resistance, superior oxidation resistance and extremely high load carrying performance. This special food grade grease formulation, meets US FDA regulations for a H-1 type lubricant (21 CFR 178.3570). Its unique formulation gives it unsurpassed EP and anti-wear properties and exceptionally long service life. It has superior shear-stability and lubricating properties over all conventional greases. It also has an operating temperature range from – 30º F to +400º F and has exceptionally high EP performance and superior rust and oxidation resistance.
White Cote AW+1
products are food grade multi-purpose lubricants with exceptional oxidation stability. Their uses include today’s modern high pressure, high-speed hydraulic systems and many general-purpose lubricant applications. They are formulated with extra high levels of oxidation inhibitors, anti-wear agents, mild EP agents, and rust inhibitors which pass the Vickers 2000 psi pump wear test while still maintaining their food grade rating. The oxidation stability and anti-wear performance of these food grade lubricants is superior to most non-food grade lubricants on the market today. These oils have many applications other than as premium quality anti-wear hydraulic oils including those calling for non detergent oils, bearing lubricants, non-EP type gear lubricants, electric motor lubricants, spindle lubricants, chain lubricants, and circulating system lubricants. White Cote AW+1 products are available in a wide variety of viscosity grades.
White Cote SAE 80W-90 and 90-140 Non Drip
are food grade multi- viscosity, multi-purpose polymer type EP gear lubricants, which can be used in nearly all gearbox applications in food plants. The two products cover the whole normal range of requirements for food grade gear lubricants, resulting in simplification of lubrication procedures and inventory reduction. These products contain polymers designed to improve the natural adhesive and cohesive properties of the lubricant and to give it a wide, multi-viscosity, operating range. The special polymers improve on the oils natural ability to adhere to the gear and bearing surfaces under the most severe conditions and aid in reducing leakage. In addition, they also contain a unique combination of additives, which gives outstanding anti-wear and EP type performance.
White Mineral Oils (5,7,9) NF
are extremely highly refined white oils, which meet FDA and USDA H-1 requirements for lubricants, which can be used in direct contact with food products. They meet US FDA regulations under 21 CFR 178.3620 for indirect use in food. Their very low toxicity and their complete inertness to most materials make them appropriate for an extremely wide range of uses. They all meet the NF requirements for drug applications. They are colorless, odorless, nearly tasteless, non-toxic, transparent fluids of varying viscosity and are composed of complex mixtures of hydrocarbons of extremely high purity.
White Mineral Oils (19,21,35) USP
are extremely highly refined white oils, which meet FDA and USDA H-1 requirements for lubricants, which can be used in direct contact with food products. They meet US FDA regulations under 21 CFR 178.3620 for indirect use in food. Their very low toxicity and their complete inertness to most materials make them appropriate for an extremely wide range of uses. They all meet the USP (United States Pharmacopoeia) requirements for drug applications. They are colorless, odorless, nearly tasteless, non-toxic, transparent fluids of varying viscosity and are composed of complex mixtures of hydrocarbons of extremely high purity.
Don’t see what you need? Contact us!