Cinnfluid AW+1

products are multi-purpose, synthetic, food grade lubricants specially formulated with very high levels of antioxidants to meet the most demanding requirements of the food processing and pharmaceutical industries. They are suitable for a wide range of general-purpose applications including today’s modern high pressure, high-speed hydraulic systems and air tool lubrication. They are formulated with a unique combination of anti-wear agents, mild EP agents, rust inhibitors, and oxidation inhibitors which pass the tough Vickers 2000 psi pump wear test while still maintaining their food grade rating. The oxidation stability and anti-wear performance of these synthetic food grade lubricants is superior to most non-food grade lubricants on the market today. These synthetic lubricants have many applications including those calling for non detergent oils, bearing lubricants, non-EP type gear lubricants, air tool oils, electric motor lubricants, spindle lubricants, chain lubricants, and circulating system lubricants. The Cinnfluid AW+1 products are all USDA H1 rated (lubricants approved for incidental contact with food) and are suitable for food machinery applications where there might be the possibility of incidental contact with the food or its packaging materials.

Cinnfluid GB+1

products are multi-purpose, food grade lubricants, based on synthetic hydrocarbons, designed to give outstanding performance in heavy-duty industrial applications at very low and/or high temperatures. These products are especially designed for heavy-duty industrial applications involving high load conditions and extremely high operating temperatures. Their superior thermal and oxidation stabilities, coupled with outstanding anti-oxidants, far exceed the performance of conventional lubricants. Their naturally high viscosity indexes assure performance across a wide range of temperatures while their low inherent pour points assure performance at low temperatures unheard of with conventional petroleum lubricants. Cinnfluid GB +1 products maintain their performance benefits at conditions where most other products fail. They are available in many different viscosities grades to meet any need.

Cinnfluid HTC (155, 235, 310, 500, 750, 1200)

products are premium, food grade, synthetic compressor fluids designed to give outstanding performance in oil flooded rotary vane and rotary screw compressors. These products have exceptional thermal and oxidation stability, which results in reducing the formation of varnish, lacquer and sludge deposits. Its high viscosity index and low pour point are natural properties of the base synthetic fluid. This is a third generation product in the development of food grade compressor fluids and is designed for 3000-hour change intervals. The shear stability of these products and its outstanding oxidation stability result in significantly longer lubricant life with reduced downtime for maintenance.

Cinnguard Greases

are special, PTFE containing, synthetic, food grade, non-melt grease formulations, which are odorless and nearly colorless. Their synthetic formulations give them truly outstanding performance at high and low temperatures and extremely long service life. They have excellent EP, anti-wear, anti-rust, anti-oxidation, and adhesive properties. The synthetic base fluids, used in their formulations, have a very high viscosity index making them excellent greases for use over wide temperature ranges. Cinnguard Greases are available in most NLGI grades and in a wide variety of oil viscosities.

Cinn-Lube FG MPA

is an aerosol product. Is a food grade multi-purpose synthetic lubricant, specially suited for lubrication of chains, slides and bearings which require a lubricant with superior protection from rust, corrosion, oxidation and wear from high loads or high temperature conditions. It is suitable for high temperature ovens.

FG 1200 Synthetic Oven Chain & Bearing Lubricant

designed for use in high temperature ovens where a USDA H-1 lubricant is wanted or needed (acceptable for incidental food contact). It can be used in applications up to 240°C or 465°F.  It offers excellent anti-wear performance and oxidation resistance.

Fire Resistant Hydraulic Fluid 59D

is a synthetic hydraulic fluid designed for applications that require a hydraulic fluid with greater fire resistance than that offered by conventional mineral oils. It has much higher flash and fire points than conventional mineral oils and some synthetic materials. This product is especially designed for heavy-duty industrial applications operating at high pressures and over wide temperature ranges. It has outstanding thermal properties as well as superior anti-wear and rust & oxidation resistance. Other advantages of its synthetic formulation are its naturally high viscosity index, low volatility, shear stability and biodegradability. It meets USDA H-1 requirements.

Formula 61

is a high purity solvent with relatively high flash point (>160°F), which allows it to be used more safely than other lower flash solvents. This high flash point also makes for easier disposal of the spent solvent. In many situations, a licensed used oil recycler can recycle it (consult your federal, state, and local regulations). It is an excellent parts washer and degreaser as well as a general-purpose solvent. It loosens grease, oil, dirt, grime and sludge allowing for easy removal and cleanup. It also can be used as an ink solvent to clean up some types of ink in printing or ink plants. It is truly a multi-purpose cleaner/degreaser.

Formula 2611 Cleaner Concentrate

is a versatile, multi-purpose liquid concentrate, formulated for hard surface cleaning. It meets USDA A1, meaning it is “acceptable as a general cleaning agent on all surfaces, or for use with steam or mechanical cleaning devices in all departments of official establishments operating under the Federal meat, poultry, shell egg grading and egg products inspection programs.” It has the ability to penetrate the toughest soils, displace them from the surface, emulsify them and keep them from redepositing on the surface being cleaned. It has excellent wetting and sheeting action and non-streak rinsing to leave a clean sparkling appearance.

Heat Transfer Fluid 235

is a premium quality, synthetic, heat transfer fluid specially designed for sustained high temperature use in closed circulating systems equipped with expansion tanks. It offers exceptional resistance to oxidation at high temperatures, keeping sludging, varnishing, and carbon deposits to an absolute minimum. It has an operating temperature range well in excess of 600º F in closed systems and offers high thermal efficiency, extremely high flash and fire points, low viscosity for easy economical circulation, and extremely low volatility to reduce losses. Its unique synthetic hydrocarbon structure offers a high degree of resistance to breakdowns during high temperature service, which far exceeds that of both conventional heat transfer oils and other synthetic heat transfer fluids. Heat Transfer Fluid 235 not only offers exceptional heat transfer properties and long term anti-fouling and high temperature stability, but does so without the inherent environmental and human health exposure risks of many heat transfer fluids in the market. It is especially suited for high temperature heat transfer applications in systems for resins, plastics, asphalts, waxes, varnishes, and many other applications. It is USDA approved H1 and NSF Registered as HT1 meaning it is acceptable for incidental contact with food, food products or other food related material, such as packaging.

Super White 1910 FG-2

is a synthetic, multi-purpose, food grade grease, specially formulated for moderate to high temperature applications where water or steam may be present.  It has outstanding water resistance, superior oxidation resistance and extremely high load carrying performance.  This special food grade grease formulation, meets US FDA regulations for a H-1 type lubricant (21 CFR 178.3570).  Its unique formulation gives it unsurpassed EP and anti-wear properties and exceptionally long service life.  It has superior shear-stability and lubricating properties over all conventional greases.  It also has an operating temperature range from – 30º F to +400º F and has exceptionally high EP performance and superior rust and oxidation resistance.

White Cote 99X132B

White Cote 99X132B is a polymer structured, zinc-free, white food grade grease with outstanding load carrying ability and superior high temperature performance.  Its unique combination of properties allows this one grease to meet nearly all of the total requirements of the food processing and pharmaceutical industries.

White Cote AW+1

products are food grade multi-purpose lubricants with exceptional oxidation stability. Their uses include today’s modern high pressure, high-speed hydraulic systems and many general-purpose lubricant applications. They are formulated with extra high levels of oxidation inhibitors, anti-wear agents, mild EP agents, and rust inhibitors which pass the Vickers 2000 psi pump wear test while still maintaining their food grade rating. The oxidation stability and anti-wear performance of these food grade lubricants is superior to most non-food grade lubricants on the market today. These oils have many applications other than as premium quality anti-wear hydraulic oils including those calling for non detergent oils, bearing lubricants, non-EP type gear lubricants, electric motor lubricants, spindle lubricants, chain lubricants, and circulating system lubricants. White Cote AW+1 products are available in a wide variety of viscosity grades.

White Cote FM

greases are specially formulated, white food grade greases, designed to meet the requirements of the food processing and pharmaceutical industries. They are multi-purpose lubricants that meetUSDA Hl (lubricants for use with incidental food contact) requirements and comply with the FDA regulations, CFR Title 21, Paragraph 178.3570. All materials used in their manufacture are of the highest purity and are manufactured under strict and rigid control. White Cote FM food machinery greases are utilized in a very broad range of applications including conventional lubricating functions, as well as to serve as release and anti-rust agents and gasket & seal materials.

White Cote FM is a time proven multi purpose grease for the food processing industry. It has excellent rust, oxidation, and water resistance, and can be used for all operations with the exception of those calling for high EP or high temperature (greater than 225°F.) performance. It has excellent pumpability at low temperatures. White Cote FM is available in NLGI Grades 2, 1, and 0.

White Cote HTP

is a special polymer structured white food grade grease with outstanding load carrying ability and superior high temperature performance. Its unique combination of properties allows this one grease to meet nearly all of the total requirements of the food processing and pharmaceutical industries. White Cote HTP has a USDA H1 (lubricants for use with incidental food contact) rating and complies with the FDA regulations, CFR Title 21, Paragraph 178.3570. All materials used in its manufacture are of the highest purity and it is manufactured under strict and rigid control.

White Cote HTP is a heavy-duty performer with excellent rust, oxidation, and water resistance, and is specially formulated for high load carrying ability, tenacious adhesion, high temperature use, and wear reducing anti-wear performance. Its wide operating temperature range (0 – 400 ^o F) and high load carrying ability allow its use in nearly all applications. This exceptional multi-purpose food machinery grease finds use in a broad range of applications including the conventional lubricating grease functions as well as serving as a release agent, anti-rust agent, and gasket & seal material. White Cote HTP is available in NLGI 2, 1, 0, 00 and 000.

White Cote SAE 80W-90 and 90-140 Non Drip

are food grade multi- viscosity, multi-purpose polymer type EP gear lubricants, which can be used in nearly all gearbox applications in food plants. The two products cover the whole normal range of requirements for food grade gear lubricants, resulting in simplification of lubrication procedures and inventory reduction. These products contain polymers designed to improve the natural adhesive and cohesive properties of the lubricant and to give it a wide, multi-viscosity, operating range. The special polymers improve on the oils natural ability to adhere to the gear and bearing surfaces under the most severe conditions and aid in reducing leakage. In addition, they also contain a unique combination of additives, which gives outstanding anti-wear and EP type performance.

White Mineral Oils (5,7,9) NF

are extremely highly refined white oils, which meet FDA and USDA H-1 requirements for lubricants, which can be used in direct contact with food products. They meet US FDA regulations under 21 CFR 178.3620 for indirect use in food. Their very low toxicity and their complete inertness to most materials make them appropriate for an extremely wide range of uses. They all meet the NF requirements for drug applications. They are colorless, odorless, nearly tasteless, non-toxic, transparent fluids of varying viscosity and are composed of complex mixtures of hydrocarbons of extremely high purity.

White Mineral Oils (19,21,35) USP

are extremely highly refined white oils, which meet FDA and USDA H-1 requirements for lubricants, which can be used in direct contact with food products. They meet US FDA regulations under 21 CFR 178.3620 for indirect use in food. Their very low toxicity and their complete inertness to most materials make them appropriate for an extremely wide range of uses. They all meet the USP (United States Pharmacopoeia) requirements for drug applications. They are colorless, odorless, nearly tasteless, non-toxic, transparent fluids of varying viscosity and are composed of complex mixtures of hydrocarbons of extremely high purity.