CINN-BIO Switch Plate Lube 100

Interlube’s CINN-BIO Switch Plate Lube 100 is a biodegradable, eco-friendly, switch plate lube. It contains no hazardous chemicals or chemicals containing volatile organic compounds (VOC).  This unique formulation contains additives to enhance the load carrying ability of its base fluid’s boundary lubricant properties.  It contains a high level of high purity synthetic graphite to provide added lubricity from graphite’s superior load carrying capabilities.  The unique combination of fluid and solid boundary and EP lubricants allows for easy switch movement and excellent wear protection.  The product remains pliable and does not become brittle even under wet, dusty, dirty, hot, gritty and abrasive conditions.  It contains no solvents and is designed for low wear and long life.

It is an NLGI 0 grade designed for easy pumping and carry down the tracks Interlube’s CINN-BIO Switch Plate Lube 100 remains pliable over a wide temperature range and does not become brittle even under wet, dusty, frigid, dirty, hot, gritty and abrasive conditions.  It contains no solvents and provides both low wear and long life.  It is also available as an NLGI 00 Grade for those users in very cold climates who prefer a thinner grease for winter pumping.

CARBOCO – Carbonless Air Compressor Oils

Interlube’s CARBOCO Oils are made from specially-selected high quality base oils meeting rigid standards. These base oils are then fortified through state-of-the-art additives against oxidation, rust and corrosion.

Due to the high temperatures generated during air/gas compression, carbon deposits are formed and generally accumulate as hard, densely packed areas.  These deposits become super-heated which often results in compressor shut-down or, in the worst cases, combustion or explosions leading to loss of equipment and potentially dangerous scenarios.  Interlube’s CARBOCO Oils eliminates damage caused by carbon deposits: any carbon formed is soft and loosely held allowing it to be easily blown off resulting in longer, trouble-free operation of compressor systems.

Endura Polymer BT-22X Grease

Interlube Endura Polymer BT-22X Greases are premium, heavy-duty, multi-purpose lithium complex greases specially designed for both low and high temperature performance.  These high melting point grease are enhanced with special additives to give them very high film strength, anti-wear and EP performance.  They incorporate premium quality high flash point oils and combines them with special polymers to impart greater staying power than conventional greases.  The blue-colored smooth tacky appearance readily identifies them from normal automotive grease products. This combination also makes them very resistant to water and helps it to adhere to most metallic surfaces.

They are available in NLGI grades 0 (220), 1 (221), and 2 (222).

Cinn-Bio Rail Curve Grease L – 100

Interlube’s CINN-BIO Rail Curve Grease L-100 is a biodegradable, eco-friendly, rail curve grease made with a biodegradable vegetable oil, a lithium soap thickener and a high level of high purity synthetic graphite.  It contains no hazardous chemicals or chemicals containing volatile organic compounds (VOC).  This unique formulation contains additives to enhance the load carrying ability of its biodegradable base fluid’s boundary lubricant properties.  It contains a high level of synthetic graphite to provide added lubricity from graphite’s superior load carrying capabilities.  It’s combination of fluid and solid boundary and EP lubricants allows for excellent load carrying capability and wear protection.

It is an NLGI 0 grade designed for easy pumping and carry down the tracks.  CINN-BIO Rail Curve Grease L-100 remains pliable over a wide temperature range and does not become brittle even under wet, dusty, frigid, dirty, hot, gritty and abrasive conditions.  It contains no solvents and provides both low wear and long life.  It is also available as an NLGI 00 Grade for those users in very cold climates who prefer a thinner grease for winter pumping.

Cinnguard Greases

are special, PTFE containing, synthetic, food grade, non-melt grease formulations, which are odorless and nearly colorless. Their synthetic formulations give them truly outstanding performance at high and low temperatures and extremely long service life. They have excellent EP, anti-wear, anti-rust, anti-oxidation, and adhesive properties. The synthetic base fluids, used in their formulations, have a very high viscosity index making them excellent greases for use over wide temperature ranges. Cinnguard Greases are available in most NLGI grades and in a wide variety of oil viscosities.

Endura Polymer Grease 802

is a super heavy duty, extreme pressure, multi-purpose grease proven to excel in difficult industrial applications. It has superior high and low temperature properties, providing performance over a wide operating temperature range, plus high load carrying ability and excellent water resistance. The polymers increase the adhesiveness and shock load carrying ability of the grease, adding to the basic outstanding performance. The unique combination of polymers, high melting grease base, and extreme pressure and anti-wear additives make this grease a truly multi-purpose lubricant.

Fire Resistant Hydraulic Fluid 59D

is a synthetic hydraulic fluid designed for applications that require a hydraulic fluid with greater fire resistance than that offered by conventional mineral oils. It has much higher flash and fire points than conventional mineral oils and some synthetic materials. This product is especially designed for heavy-duty industrial applications operating at high pressures and over wide temperature ranges. It has outstanding thermal properties as well as superior anti-wear and rust & oxidation resistance. Other advantages of its synthetic formulation are its naturally high viscosity index, low volatility, shear stability and biodegradability. It meets USDA H-1 requirements.

Formula 6755-1 Water Displacing Rust Preventative

is a water displacing rust inhibitor especially suited for protecting parts and equipment during processing and/or storage. It has a unique penetrating – displacing action which results in the formation of an adherent – impenetrable rust preventative film. It contains solvent based materials which aid penetration and film formation and then evaporate, leaving a durable protective film which stands up to high humidity, weathering, and even water immersion or condensation run off. The protective film is slightly oily to the touch, transparent, and non conductive. Formula 6755-1 can be applied by brushing, dipping, slushing, or spraying. It forms a uniform film on dipping (~ 0.15 mil) and gives a high coverage rate.

Interlube Quench Oil 100 A

a  general purpose, premium quality quenching fluid for carbon steel and heavier alloys which require fast/moderate quenching speed.  It exhibits excellent water separation and protects against rust and corrosion.

Nova Oils

Interlube’s NOVA A Hydraulic Oils are premium quality anti-wear, anti-foam, rust and oxidation inhibited hydraulic oils, which meet the requirements of all major hydraulic equipment manufacturers.  They were developed for use in modern high pressure, high speed hydraulic systems to ensure maximum pump wear protection, and to prolong the systems life.  They pass the difficult and demanding tests set by Vickers, Denison, and Cincinnati Machine and offer performance significantly beyond that required to merely pass.   They are made from the finest premium quality solvent- refined paraffinic base stocks to give optimum oxidation stability and performance over wide operating temperature ranges.  They are especially suited for high speed and heavily loaded systems where high shear resistance and high temperature stability are essential.  These oils have many applications, other than in hydraulic systems, including those calling for non-detergent type oils.  They are especially suited for bearing lubrication, circulating systems, non-EP type gear applications, sprockets, chains, slides, linkages, couplings, spindles, electric motors, and all once through applications.   They offer significantly greater load carrying ability and anti-wear properties over conventional R & O oils, which are recommended for many of the above applications.

Protect-O-Cote

products are a series of versatile and effective rust preventatives for use under the most severe corrosion conditions. The Protect-O-Cote products have solvent carriers and, on evaporation of the solvent, they deposit an amber, translucent, “dry to the touch” film that gives long-term indoor and outdoor corrosion protection. The film protects metal surfaces against corrosion when exposed to extremes of high humidity, high and low temperatures, water mists, salt-water sprays, and environmental fumes. Protection supplied by the Protect-O-Cote products ranges from a long term indoor storage from Protect-O-Cote 1000 to long term outdoor storage from Protect-O-Cote OS. Protect-O-Cote products do not remove rust, but after thorough removal of loose scales, they can be applied to rusted surfaces to prevent further corrosion.

Quenching Oil 75 FQ

a general purpose, premium quality, quenching fluid for use in steels lean in alloy content and small grain size, which require fast to moderate quenching speed. It is ideal for parts with odd shapes or variable sections.

Red Hi Lo Temp Multi-Purpose Grease

represents a great advancement in high temperature grease technology. This multi-purpose grease provides exceptional service under a wide range of temperatures, pressures, moisture levels and adverse operating conditions. Red Hi Lo will pump at low ambient temperatures and provide excellent lubrication at high bearing temperatures of up to 550°F and above. The red color enables the operators to see at a glance where and when a part needs attention. Red Hi Lo is manufactured from the finest oils, thickeners, stabilizers, inhibitors and other additives and is produced with modern manufacturing techniques and close attention to quality control. This provides the user with a superior grease of outstanding reliability, which can result in substantially reduced maintenance costs, downtime and lubrication frequency. Red Hi Lo can be used to lubricate: ball bearings, conveyor bearings, wheel bearings, roller bearings and plain bearings in areas of high or ambient temperatures on any type of industrial equipment. Slides and glides, on various equipment, can also be lubricated. This grease can be applied by pressure systems, hand grease guns, and cups or just by hand. Because of the tenacity and non-melt features of this grease, vertical, horizontal or inclined areas do not present any problems or require special procedures.

Rust Preventative 208

is a completely synthetic, heavy duty, water soluble, rust inhibitor designed to give excellent rust protection for short-term indoor storage. Its water-based formulation makes it easy to dilute with water. Dilution ratios vary upon the amount of film desired and storage duration requirements. In general, 20:1 dilution gives very good rust protection. Rust Preventative 208 is formulated with additives designed to prevent spoilage, bacterial growth, and residue build up – giving it a long, trouble free life.

WG 200 Fire Resistant Hydraulic Fluid

is a specially formulated water-glycol fluid that meets both high-pressure pump requirements and the most severe fire resistant qualifications. It passes Factory Mutual “less hazardous hydraulic fluid” tests and is rated as “permissible fire resistant hydraulic fluid” by the U.S. Bureau of Mines. WG 200 is formulated to meet manufacturer’s pump tests and contains both liquid and vapor phase corrosion inhibitors to provide complete corrosion protection for hydraulic systems.