Product Categories
- Air Tool Oils
- Compressor Oils
- Gear Lubes
- Hydraulic Oils
- Chain Lubes
- Heat Transfer Fluids
- Vacuum Pump Oils
- Grease
- Turbine Oil
- Pneumatic
- Metalworking Fluids
- Aerosol
- Bearing Lubricants
- Industrial Cleaners
- Refrigeration Oils
- Release Agents
- Rust Preventatives
- Wire Rope Lubricants
- Other Lubricants
- Lubrication Accessories
Pneumatic
Interlube Corporation manufactures three different lines of pneumatic formulations. The Cinnfluid AW+1 line and the White Cote AW+1 line of products are used in food plants where H-1 products are necessary. The Endura Air Tool Oil line of products are used in normal industrial settings where "food grade" is not needed. All of these products perform extremely well in these applications.
Please contact us with any questions or if you need help picking out the right fluid for your system.
Cinnfluid AW+1
products are multi-purpose, synthetic, food grade lubricants specially formulated with very high levels of antioxidants to meet the most demanding requirements of the food processing and pharmaceutical industries. They are suitable for a wide range of general-purpose applications including today’s modern high pressure, high-speed hydraulic systems and air tool lubrication. They are formulated with a unique combination of anti-wear agents, mild EP agents, rust inhibitors, and oxidation inhibitors which pass the tough Vickers 2000 psi pump wear test while still maintaining their food grade rating. The oxidation stability and anti-wear performance of these synthetic food grade lubricants is superior to most non-food grade lubricants on the market today. These synthetic lubricants have many applications including those calling for non detergent oils, bearing lubricants, non-EP type gear lubricants, air tool oils, electric motor lubricants, spindle lubricants, chain lubricants, and circulating system lubricants. The Cinnfluid AW+1 products are all USDA H1 rated (lubricants approved for incidental contact with food) and are suitable for food machinery applications where there might be the possibility of incidental contact with the food or its packaging materials.
Endura Air Tool Oils
emulsify moisture in compressed air in pneumatic tools to maintain the original optimum performance of your pneumatic tools at all times. They do this through a unique combination of special base oils and additive treatments which virtually eliminate the normal rusting, gumming, and wear problems. They provide: emulsifications of moisture in compressed air, detergency and cleaning action to keep the tools clean and the air passages open, anti-wear, superior adherence, rust and corrosion inhibition and oxidation resistance. These advantages add up to reduced maintenance cost, longer equipment life, less oil consumption, less downtime and increased productivity due to optimum air tool equipment performance. Endura Air Tool Oil is available in many viscosity grades to suit your specific need: Endura Air Tool Oil – Extra Light, Endura Air Tool Oil – Light, Endura Air Tool Oil – Light Medium and Endura Air Tool Oil – Medium.
White Cote AW+1
products are food grade multi-purpose lubricants with exceptional oxidation stability. Their uses include today’s modern high pressure, high-speed hydraulic systems and many general-purpose lubricant applications. They are formulated with extra high levels of oxidation inhibitors, anti-wear agents, mild EP agents, and rust inhibitors which pass the Vickers 2000 psi pump wear test while still maintaining their food grade rating. The oxidation stability and anti-wear performance of these food grade lubricants is superior to most non-food grade lubricants on the market today. These oils have many applications other than as premium quality anti-wear hydraulic oils including those calling for non detergent oils, bearing lubricants, non-EP type gear lubricants, electric motor lubricants, spindle lubricants, chain lubricants, and circulating system lubricants. White Cote AW+1 products are available in a wide variety of viscosity grades.