Product Categories
- Food Grade
- Air Tool Oils
- Compressor Oils
- Gear Lubes
- Hydraulic Oils
- Chain Lubes
- Heat Transfer Fluids
- Vacuum Pump Oils
- Grease
- Turbine Oil
- Pneumatic
- Metalworking Fluids
- Aerosol
- Bearing Lubricants
- Industrial Cleaners
- Refrigeration Oils
- Release Agents
- Rust Preventatives
- Wire Rope Lubricants
- Other Lubricants
- Lubrication Accessories
Products
Here are a few of our products. We can custom design a product to meet your requirements. Please contact us for additional information.
K-Draw 67 HF
is a food grade synthetic lubricant, designed for drawing, stamping, and forming operations. It is specially formulated for moderate to heavy-duty applications where very low residues are desired. It contains solvents, cleaners and solublizers to keep residues low and highly efficient boundary lubricants to prevent buildup of materials on the metals surfaces. K-Draw 67 HF is formulated with materials that meet US FDA requirements for incidental contact with food products and meets H-1 requirements. It is also designed for a wide range of application methods and can be applied by hand wiping, brushing, drip applicators, transfer pads, and various spraying methods.
K-Draw 165
is a H-1 food grade (NSF registered) evaporative stamping lubricant designed for light to heavy duty forming operations and light to moderate duty drawing applications. It has unique properties as a forming and stamping lubricant due to its exceptional wetting and cleaning ability as well as its lubricating capabilities. It finds use in a wide range of forming and stamping operations as well as some coining applications. Another major benefit of K-Draw 165 is that it does not leave unwanted residues, which require extensive and expensive cleaning operations. You can use it to do the forming operation and proceed to subsequent operations or final use applications without a cleaning step. K-Draw 165 is an exceptional multi-purpose product, which is safe on all metals and most plastics. It can be dipped, rolled, sprayed, brushed, wiped or otherwise transferred prior to the operation. Application just prior to the operation is recommended. Its high flash point makes it much safer to use than many competitive products and it does not cause staining or discoloration.
K-Draw 205
is a unique, food grade lubricant, designed for light to moderate duty forming, stamping, and drawing operations. This product is a very low viscosity fluid which has exceptional wetting and cleaning ability, as well as lubricating properties. It finds use in a wide range of forming and stamping operations as well as some coining operations. A major benefit of K-Draw 205 is that it doesn’t leave unwanted residues which require extensive cleaning. Use it to do the forming operation and you are finished with it and can proceed to subsequent operations without the need for an added cleaning step.
K-Draw 260
is food grade stamping lubricant designed for light to heavy duty forming operations and light to moderate drawing applications. It has unique properties as a forming and stamping lubricant due to its exceptional wetting and cleaning ability as well as its lubricating capabilities. It finds use in a wide range of forming and stamping operations, as well as some coining applications. It leaves a very good, short term rust preventative film on the part after the metal forming operation. K-Draw 260 leaves a low viscosity film that needs only a light cleaning operation to remove. In most cases, the residue is easily cleaned off with a light duty, water based cleaner or solvent degreaser. Please contact your Interlube representative for our recommendations for your application.
K-Draw 9938A
K-Draw 9938A is a food grade stamping lubricant designed for light to heavy duty forming operations.
M 502 Grease
is a special moly (molybdenum disulfide), heavy duty, extreme pressure, multi-purpose grease proven to be outstanding for chassis and bearing lubrication in trucks, tractors, automobiles, fifth wheels, and industrial and construction equipment, as well as railroad applications. It is designed to give superior lubrication over a very wide range of conditions. The combined effects of moly and other extreme pressure agents give reduced wear and increased load carrying ability. M502 Grease holds up where conventional multipurpose greases fail.
Metallic Open Gear Cote
is a high load carrying, bronze colored, metal containing open gear grease. The bronze color enables you to easily determine, at a glance, if the gear is coated properly. It contains a combination of several types of solid lubricants and friction reducing additives as well as rust and corrosion inhibitors. It works well on moderate to high-speed gears on presses. It is also suitable for high temperature operations and has excellent water resistance. The metallic and other solid lubricants also aid in filling in imperfections and galled or damaged areas of older gear surfaces, allowing them to run more smoothly and last longer.
Moly Chain and Cable Lube Non Drip
is compounded with the highest quality base oils and additives. This dark gray lubricant has strong attraction to metals, assuring excellent lubrication of chains, sprockets, cables and wire rope. Moly Chain & Cable Lube Non Drip penetrates the rollers, pins, links and bushings of chains, leaving a lubricating film, and thus reducing friction, wear and corrosion. When applied to wire ropes and cables, this product will not only penetrate to the core, but the moly and other additives will plate the strands and provide anti-wear and rust protection. Moly Chain & Cable Lube Non Drip increases equipment life, reduces maintenance costs by reducing down time, and lowers power consumption. It can be used on material handling equipment, road and construction machinery, marine, railroad, mining, aircraft field handling, chain saws, cutter bars, conveyors, hoist chains, link and roller assemblies. It is available is several viscosities, making it useful in many different types of chain lubricating systems and application methods.
Moly Hi Lo Temp Multi-Purpose Grease
is a non-melt, multi-purpose grease that contains molybdenum disulfide (moly) to increase its load carrying ability. The moly plates out on metal surfaces providing a tenacious film that results in low friction and good wear protection. Moly Hi Lo provides outstanding performance at high temperatures of up to 550°F and above due to its high viscosity oils and non-melt thickener. It can be used in many applications on a wide variety of industrial equipment.
MT Gear Lubricant
is a traction motor gear lubricant designed for traction motor gearboxes on railroad diesel engines of all types. It was specially designed to lubricate the higher horsepower output per axle, traction motor drive units, developed by GE and EMD. This formulation is a non-leaded product to avoid the environmental problems associated with handling and disposal of leaded products. Even though it was developed for “newer” traction motor units, it is applicable to all older units, which called for the products that contained leaded EP additives. It incorporates a unique combination of lithium soap thickeners and very heavy, high viscosity, oils and additives. This combination provides long life protection to the gears and resists leakage from the gear case. It is packaged in convenient one-pound poly bags, which can be directly inserted into the gearbox.