Product Categories
- Air Tool Oils
- Compressor Oils
- Gear Lubes
- Hydraulic Oils
- Chain Lubes
- Heat Transfer Fluids
- Vacuum Pump Oils
- Grease
- Turbine Oil
- Pneumatic
- Metalworking Fluids
- Aerosol
- Bearing Lubricants
- Industrial Cleaners
- Refrigeration Oils
- Release Agents
- Rust Preventatives
- Wire Rope Lubricants
- Other Lubricants
- Lubrication Accessories
Products
Here are a few of our products. We can custom design a product to meet your requirements. Please contact us for additional information.
Best Tap 2400 EP
is an extreme pressure lubricant designed specifically for general purpose tapping operations. It contains high levels of extreme pressure additives as well as boundary lubricant additives and anti-corrosion ingredients. Its very high viscosity gives Best Tap 2400 EP adequate body for all tapping operations insuring adherence to the tap throughout the entire tapping operation. It is used as received and applied by hand.
Bio-Cinn NF 220
a multi-viscosity, multi-purpose, biodegradable lubricant, designed for heavy duty industrial applications. Its inherently superior thermal and oxidation stability, coupled with outstanding anti-oxidants, EP, and anti-wear agents, far exceeds the capabilities of conventional lubricants.
Blue Tacky 803 Grease
is a premium, heavy duty, multi-purpose lithium complex grease specially designed for both low and high temperature performance. This high melting point grease is enhanced with special additives to give it very high film strength, anti-wear and EP performance. It incorporates premium quality, high flash point oils and combines them with special polymers to give it greater staying power than conventional greases. It has a blue colored smooth tacky appearance that readily identifies it from normal automotive grease products. This combination also makes it very resistant to water and gives it that special adherence to metallic surfaces.
Booth Coatings
Interlube Corporation offers a variety of paint booth coatings designed for use with all types of paints and coatings.
Carbonless Air Compressor Oils
are specially designed for reciprocating compressors to eliminate damage that carbon deposits can cause in these air compressors. Most oils will form very hard carbon deposits, which can cause extensive damage and loss of performance. Any trace amount of carbon formed from Carbonless Air Compressor Oils is of a very soft fluffy nature and is easily blown away, with the air discharge, leaving no damage to valves or rings, resulting in longer trouble free operation. They are available in a wide range of viscosities. Most units use the # 30 or # 40 grade but some units with direct injection into the cylinder head use the # 20 grade.
Chain Lube 250 MHT
is a special mineral oil-based chain lubricant that contains a unique synthetic additive and molybdenum disulfide. It is performs extremely well on most chains and is formulated to handle high temperatures. This low viscosity lubricant allows the additives and moly to penetrate every part of the chain; thus delivering an excellent synthetic, high temperature, moly-containing film.
Chain Saw Bar Oil 136 W
is a specially formulated chain saw lubricant designed to extend the life of the bar, chain and sprocket on chain saws. The EP, polymer and other additives in this lubricant give it excellent wetting characteristics allowing it to reach all areas that need lubrication and reduces the wear on all parts of the saw. Its tackiness helps it to adhere to the chain at high speeds encountered while in operation.
Cinn-Bio Rail Curve Grease L – 100
is a biodegradable, eco-friendly, rail curve grease formulated with a biodegradable vegetable oil, a lithium soap thickener and a high level of high purity synthetic graphite. It contains no hazardous chemicals or chemicals containing volatile organic compounds (VOC). This unique formulation contains additives to enhance the load carrying ability of its biodegradable base fluids boundary lubricant properties. It contains a high level of synthetic graphite to provide added lubricity from graphite’s superior load carrying capabilities. Its combination of fluid and solid boundary and EP lubricants allows for excellent load carrying capability and wear protection.
Cinncom SHC 32, 46, 68 & 100
are premium quality, synthetic hydrocarbon based, compressor fluids designed to give outstanding performance in oil flooded rotary vane and rotary screw compressors. They have exceptional thermal and oxidation stability that results in minimizing the formation of varnish, lacquer, and sludge deposits. Their high VI and low pour points are inherent “Molecular Advantages” of these completely synthetic products. The outstanding properties of these products result in significantly longer lubricant life (extended drain intervals), longer equipment life (reduced wear), reduced downtime (increased production time), improved safety and lower maintenance costs. All of these add up to lower overall costs in your business. Other viscosity grades are available.
Cinnfluid AW+1
products are multi-purpose, synthetic, food grade lubricants specially formulated with very high levels of antioxidants to meet the most demanding requirements of the food processing and pharmaceutical industries. They are suitable for a wide range of general-purpose applications including today’s modern high pressure, high-speed hydraulic systems and air tool lubrication. They are formulated with a unique combination of anti-wear agents, mild EP agents, rust inhibitors, and oxidation inhibitors which pass the tough Vickers 2000 psi pump wear test while still maintaining their food grade rating. The oxidation stability and anti-wear performance of these synthetic food grade lubricants is superior to most non-food grade lubricants on the market today. These synthetic lubricants have many applications including those calling for non detergent oils, bearing lubricants, non-EP type gear lubricants, air tool oils, electric motor lubricants, spindle lubricants, chain lubricants, and circulating system lubricants. The Cinnfluid AW+1 products are all USDA H1 rated (lubricants approved for incidental contact with food) and are suitable for food machinery applications where there might be the possibility of incidental contact with the food or its packaging materials.