Product Categories
- Air Tool Oils
- Compressor Oils
- Gear Lubes
- Hydraulic Oils
- Chain Lubes
- Heat Transfer Fluids
- Vacuum Pump Oils
- Grease
- Turbine Oil
- Pneumatic
- Metalworking Fluids
- Aerosol
- Bearing Lubricants
- Industrial Cleaners
- Refrigeration Oils
- Release Agents
- Rust Preventatives
- Wire Rope Lubricants
- Other Lubricants
- Lubrication Accessories
Products
Here are a few of our products. We can custom design a product to meet your requirements. Please contact us for additional information.
Degreasing Solvent IV
Non-flammable aerosol product designed to clean oil, dust, and other particulate matter from sensitive electronic parts.
Drawing Compound 134B
is a very heavy duty, EP type, multi purpose, water-soluble drawing compound specially suited for high speed, high production runs. It utilizes the latest developments in surface chemistry to make a water-soluble product, which out performs even the best high EP and fatty type oil soluble compounds in high-speed operations. This product is not a simple emulsified chlorinated oil or an EP soluble oil with a different name. It was formulated from scratch with the best available drawing agents. It combines a whole group of high performance chemical, extreme pressure agents, rust and corrosion inhibitors, and friction reducing wetting agents. This unique combination results in a water reducible product with overall performance properties exceeding those of straight oil and fatty oil-based products. Drawing Compound 134B can be used on all metals. Use levels will vary with the severity of the drawing operation, the amount of heat produced in the draw, the rate of drawing speed, and die design. It is also available in a heavier viscosity grade: Drawing Compound 268B
Dry Moly Lubricant
is a non-chlorinated, long lasting, dry film lubricant & coating for extreme temperatures & pressures which is particularly suitable for dirty or dusty environments. Reduces friction & wear. Inert to water, oil, alkali, and some acids. Leaves a dry lubricating surface. For use on bearings, gears, compressors, motors, chains, conveyors, etc. Adheres to metal, rubber, glass, & most plastics.
Endura Air Tool Oils
emulsify moisture in compressed air in pneumatic tools to maintain the original optimum performance of your pneumatic tools at all times. They do this through a unique combination of special base oils and additive treatments which virtually eliminate the normal rusting, gumming, and wear problems. They provide: emulsifications of moisture in compressed air, detergency and cleaning action to keep the tools clean and the air passages open, anti-wear, superior adherence, rust and corrosion inhibition and oxidation resistance. These advantages add up to reduced maintenance cost, longer equipment life, less oil consumption, less downtime and increased productivity due to optimum air tool equipment performance. Endura Air Tool Oil is available in many viscosity grades to suit your specific need: Endura Air Tool Oil – Extra Light, Endura Air Tool Oil – Light, Endura Air Tool Oil – Light Medium and Endura Air Tool Oil – Medium.
Endura Gear Lubes Non Drip
are multi-viscosity polymer gear lubricants, designed to give total performance over wide temperature ranges for essentially all gear applications. They are formulated to give outstanding performance in the most severe industrial, automotive and heavy-duty trucking applications. The industrial applications cover all enclosed gearboxes including worm gears. The automotive and heavy-duty trucking applications include high performance hypoid gears and limited slip differentials. Incorporation of polymers gives them true multi-viscosity performance to cover for wide temperature fluctuations due to daily and seasonal changes. They also contain special polymers to improve on the oil’s natural ability to adhere to the gear and bearing surfaces under the most severe conditions and to reduce leakage. All of these factors add up to reduced maintenance, decreased downtime and improved performance. Endura Gear Lubes are available in all SAE gear lubricant grades.
Endura Moly Gear Lubes Non Drip
are multi viscosity – multi purpose polymer gear lubricants fortified with molybdenum disulfide (MoS2) and designed to give total performance over wide temperature ranges for essentially all gear applications. They are formulated to give outstanding performance in the most severe industrial, automotive and heavy-duty trucking applications. The industrial applications cover all enclosed gearbox applications including worm gears. Incorporation of polymers gives them true multi-viscosity performance to cover for wide temperature fluctuations due to daily and seasonal changes. The MoS2 is incorporated through a special process to produce an extremely stable suspension of the “moly” lubricating solids. The “moly” lubricating solids are of a sub-micron size that assures a stable suspension and eliminates concerns over removal by settling or filtration. They also contain special polymers to improve on the oils natural ability to adhere to the gear and bearing surfaces under the most severe conditions and to reduce leakage. All of these factors add up to reduced maintenance, decreased down time and outstanding performance. They are available in all SAE and AGMA gear lubricant grades.
Endura Polymer Grease 802
is a super heavy duty, extreme pressure, multi-purpose grease proven to excel in difficult industrial applications. It has superior high and low temperature properties, providing performance over a wide operating temperature range, plus high load carrying ability and excellent water resistance. The polymers increase the adhesiveness and shock load carrying ability of the grease, adding to the basic outstanding performance. The unique combination of polymers, high melting grease base, and extreme pressure and anti-wear additives make this grease a truly multi-purpose lubricant.
Endura Polymer Grease HD 252
is a premium, very heavy duty, EP containing, multi-purpose grease designed for industrial, off road, mining, construction, farm and transportation applications. It meets tough NLGI certification tests for multi-purpose greases and is extremely water resistant and adhesive. It is formulated with a premium performance package of high film strength agents, extreme pressure agents and anti-wear agents to give it superior load carrying and protective properties. The polymers incorporated in the formula increase the adhesiveness and shock load carrying abilities of the grease. Its own unique combination of additives and premium quality base stocks make it a truly heavy-duty multi-purpose lubricant. It is a NLGI #2 grease and is available also as a #1 (251) and 0 (250).
Evaporative Stamping Lubricant 170
is designed for light to heavy duty forming operations and light to moderate duty drawing applications. It has unique properties as a forming and stamping lubricant due to its exceptional wetting and cleaning ability, as well as its lubricating capabilities. It finds use in a wide range of forming and stamping operations as well as some coining applications. Another major benefit of Evaporative Stamping Lubricant 170 is that it does not leave unwanted residues, which require extensive and expensive cleaning operations. You can use it to do the forming operation and proceed to subsequent operations or final use applications without a cleaning step. Evaporative Stamping Lubricant 170 is an exceptional multi-purpose product, which is safe on all metals and most plastics. It can be dipped, rolled, sprayed, brushed, wiped or otherwise transferred prior to the operation. Application just prior to the operation is recommended. It is used just as it comes out of the drum. It normally does not require use of other additives or diluents and should be used as is. Its high flash point makes it much safer to use than many competitive products and it does not cause staining or discoloration.
FG 1200 Synthetic Oven Chain & Bearing Lubricant
designed for use in high temperature ovens where a USDA H-1 lubricant is wanted or needed (acceptable for incidental food contact). It can be used in applications up to 240°C or 465°F. It offers excellent anti-wear performance and oxidation resistance.