Product Categories
- Food Grade
- Air Tool Oils
- Compressor Oils
- Gear Lubes
- Hydraulic Oils
- Chain Lubes
- Heat Transfer Fluids
- Vacuum Pump Oils
- Grease
- Turbine Oil
- Pneumatic
- Metalworking Fluids
- Aerosol
- Bearing Lubricants
- Industrial Cleaners
- Refrigeration Oils
- Release Agents
- Rust Preventatives
- Wire Rope Lubricants
- Other Lubricants
- Lubrication Accessories
Products
Here are a few of our products. We can custom design a product to meet your requirements. Please contact us for additional information.
Formula 2610 Cleaner Concentrate
is a very versatile, multi-purpose liquid concentrate specially formulated for all hard surface cleaning. It contains no severely harsh or hazardous chemicals, yet gives heavy duty cleaning performance. It can penetrate the toughest soils, displace them from the surface, emulsify them, and prevent the soils from redepositing on the surface being cleaned. It has excellent wetting and sheeting action and no-streak rinsing to give that clean, sparkling appearance desired. Due to its unique concentrated multi-purpose formulation and easy to use liquid form, it’s use level can be adjusted to suit the task – from high levels for the toughest grit, grease, and grime – to very low levels for most cleaning operations to give the optimum economy of use. Formula 2610 is used for washing trucks, cars, buses, machinery, floors, walls, tables, equipment, seats, plastics, upholstery, woodwork, and painted surfaces. Dilution levels vary depending on soil loads and types, as well as with methods of application. Formula 2610 can be used with hand, brush, spray, high-pressure washers, steam, and other automated application systems. It is safe to use on stainless steel, steel, iron, aluminum, magnesium, copper, brass and other soft metals, as well as on most plastics and paints.
Formula 2611 Cleaner Concentrate
is a versatile, multi-purpose liquid concentrate, formulated for hard surface cleaning. It meets USDA A1, meaning it is “acceptable as a general cleaning agent on all surfaces, or for use with steam or mechanical cleaning devices in all departments of official establishments operating under the Federal meat, poultry, shell egg grading and egg products inspection programs.” It has the ability to penetrate the toughest soils, displace them from the surface, emulsify them and keep them from redepositing on the surface being cleaned. It has excellent wetting and sheeting action and non-streak rinsing to leave a clean sparkling appearance.
Formula 3160A Iron Phosphatizer
is a combined cleaning – phosphatizing compound for preparation of steel and aluminum surfaces for coating applications. Use of Formula 3160A results in greatly improved paint adhesion and corrosion protection. Its cleaning action is so good that a pre-cleaning operation is not necessary in most cases. Formula 3160 A contains a unique combination of accelerators and promoters that speed up the phosphatizing action and assures a tough, durable, corrosion resistant coating.
Formula 6424 CRA
is a high quality concrete release agent, designed for use in all types of concrete release applications. Its low surface tension and excellent wetting properties allow it to cover the desired forms completely. It has outstanding corrosion resistance and can even be used for some short-term corrosion protection.
Formula 6755-1 Water Displacing Rust Preventative
is a water displacing rust inhibitor especially suited for protecting parts and equipment during processing and/or storage. It has a unique penetrating – displacing action which results in the formation of an adherent – impenetrable rust preventative film. It contains solvent based materials which aid penetration and film formation and then evaporate, leaving a durable protective film which stands up to high humidity, weathering, and even water immersion or condensation run off. The protective film is slightly oily to the touch, transparent, and non conductive. Formula 6755-1 can be applied by brushing, dipping, slushing, or spraying. It forms a uniform film on dipping (~ 0.15 mil) and gives a high coverage rate.
Four Way Action II
An all purpose, non-flammable, non-conductive mechanic’s spray. Penetrates through rust and corrosion to loosen frozen nuts and bolts. Displaces moisture in wet electrical systems. Leaves treated surfaces protected with residual anti-corrosive film.
Gear Lube 2600 ND
is a very heavy-duty, non-asphaltic, special resin based, EP open gear lube. It is a very viscous formulation that is not thinned down with solvents. It deposits a tenacious flexible-fluid film on open gears that resists runoff, wash off, corrosion, displacement, and throw off, even at high speeds. The non-asphaltic base makes it much safer than the typical open gear lubes based on asphalts and tars. The special base also does not dry out and “crack” like many of the tar and asphalt based products. It is very water resistant, has EP performance, and is self-healing if scratched or cut while using. It is designed for temperatures up to approximately 240ºF.
Graphite Chain Lube #146
is a solvent based chain lubricant specially designed for lubrication of high temperature oven chains of the type used on bakery ovens and similar applications. It is an updated and improved lubricant over the “old style” kerosene and graphite mixtures used for over fifty years in the baking industry. The premium grade graphite in Graphite Chain Lube #146 assures longer chain life, higher load carrying properties, and reduced energy costs. This product incorporates a special carrier fluid, which is much less hazardous to human health and the environment than the “old style” chain lubricants.
Heat Transfer Fluid 235
is a premium quality, synthetic, heat transfer fluid specially designed for sustained high temperature use in closed circulating systems equipped with expansion tanks. It offers exceptional resistance to oxidation at high temperatures, keeping sludging, varnishing, and carbon deposits to an absolute minimum. It has an operating temperature range well in excess of 600º F in closed systems and offers high thermal efficiency, extremely high flash and fire points, low viscosity for easy economical circulation, and extremely low volatility to reduce losses. Its unique synthetic hydrocarbon structure offers a high degree of resistance to breakdowns during high temperature service, which far exceeds that of both conventional heat transfer oils and other synthetic heat transfer fluids. Heat Transfer Fluid 235 not only offers exceptional heat transfer properties and long term anti-fouling and high temperature stability, but does so without the inherent environmental and human health exposure risks of many heat transfer fluids in the market. It is especially suited for high temperature heat transfer applications in systems for resins, plastics, asphalts, waxes, varnishes, and many other applications. It is USDA approved H1 and NSF Registered as HT1 meaning it is acceptable for incidental contact with food, food products or other food related material, such as packaging.
Heat Transfer Oil 22
is a premium quality, ashless, heat transfer fluid designed for use in closed circulating systems equipped with expansion tanks. It offers exceptional resistance to cracking and sludging in such operations at temperatures up to 600˚ F, along with high thermal efficiency, low viscosity for easy economical circulation, extremely good oxidation resistance, and very low volatility. It has a specially processed saturated hydrocarbon structure which offers outstanding stability and resistance to breakdown in service. Its properties, including high temperature and oxidation resistance, are superior to most heat transfer oils and some synthetic fluids. Heat Transfer Oil 22 is considered to be a very safe product in both environmental and human health analyses.